Specifications / Overview:
Announcement: 2016 SeptemberNetworks: UMTS 900 2100, GSM 900, 1800
Internet: HSDPA, HSUPA, EDGE
Wi-Fi: b / g / n, 2,4 ГГц
Display: TFT, 5 ", 480x854, touch, capacitive, multitouch
OS: Android 6.0 Marshmallow
Iron: 1.3 GHz, 4 cores
Memory: 1 GB of RAM 8 GB ROM, Micro-SD to 32GB
Battery: Li-Ion, 1900 mAh
Weight: 140 g
Dimensions: 141,2 x 72,3 x 10,4 mm
Photos: 5 MP, flash, no autofocus
Front: 0.3 MP
Radio: yes
Bluetooth: v4.0, A2DP
Navigation: GPS, A-GPS
Сим-карта 2 Micro-SIM + Nano-SIM
Flashlight: yes
* Download the firmware Fly Nimbus 9 FS509: *
FS509_SW_20161228_SW14_SPRD_FLY.pac SIZE: 1.98GB SPRD SC7731C
FS509_SW_20170119_SW14_FLY.7z SIZE: 876.7MB MTK MT6580
Operating method for removing the FRP lock Fly Nimbus 9 FS509 and other patterns on SPREADTRUM (SPRD) processor:
DOWNLOAD official firmware to your phone, better than the same version as on your phone, or a version of a large (for the earlier version of success is not guaranteed, that way as producers love to change the addresses of partitions (partition) firmware from version to version on the provided processor, if firmware version lower than the set - addresses have every chance of remaining old (more precisely, those that you have in your phone) and erasing is not guaranteed).
Find drivers for spreadtrum phones and programku flasher ResearchDownload R2.9.9017 version or higher. Do I need ResearchDownload, FACTORYDOWNLOAD - will not work! or searches the branches for the rest spreadtrum phones)
Set way setup.exe start driver.
If a confirmation window will pop up installation nepodisannyh drivers (unless you have disabled control Driver's signature) - choose "install anyway". Total required to be 4-D posts.
Charge your phone for at least 80%.
Distort the phone battery.
Clamp on the phone off cells. "Minus the volume" and not releasing it to connect your phone to a computer.
Will the process of installing the drivers of virtual COM-ports.
After installing the drivers - disable the phone.
Run ResearchDownload.
Press the key with the first pinion and specify your firmware file (PAC) file.
We look forward to unpack the firmware.
(On the disc, where the lies you ResearchDownload should be free 4 GB). After unpacking, you are required to become available in other panel keys.
Click on the second cells. with 2 gears.
In the Options window, go to the tab "JIG Control" and remove all the jackdaws "Enable JIG ..." in the section "JIG State".
"You have not enable any JIG!"Press"ОК".
This news informative and everything does not affect.
Go to the tab "Backup" and becomes the checkbox "Save NV to local".
This will allow us to save NVRAM reformatting.
The program itself will fill the saved NVRAM ago when the firmware after formatting.
Go to the "Flash Operations" tab.
At the bottom put the check on the "Erase All Flash".
Go to the tab "Options" and remove the checkbox with "Reset to normal"
Click the button below "OK".
The key panel programki third click the arrow button (Start).
At the message "Do you really want to delete all flash memory in the phone?" The answer is - yes (yes)
Distort the battery in the phone.
Clamp on the phone off cells. "Minus the volume" and not releasing it to connect your phone to your computer.
The window of the program is required to process begun by the firmware.
In the column "Progress" percent fill and format for each partition, and column Time (s) - time.
Only after such as in the column "Progress" sign appeared greenish color "PASSED!". - Click the Stop button (fourth from the square).
Disconnect the phone.
Distort the battery.
Turn on the phone.
We are waiting the first initialization firmware after pouring (very long, up to 5 minutes).
As a result, you get a clean unlocked phone. !!!
Operating method for removing the FRP lock Fly Nimbus 9 FS509 and other patterns on SPREADTRUM (SPRD) processor:
DOWNLOAD official firmware to your phone, better than the same version as on your phone, or a version of a large (for the earlier version of success is not guaranteed, that way as producers love to change the addresses of partitions (partition) firmware from version to version on the provided processor, if firmware version lower than the set - addresses have every chance of remaining old (more precisely, those that you have in your phone) and erasing is not guaranteed).
Find drivers for spreadtrum phones and programku flasher ResearchDownload R2.9.9017 version or higher. Do I need ResearchDownload, FACTORYDOWNLOAD - will not work! or searches the branches for the rest spreadtrum phones)
Set way setup.exe start driver.
If a confirmation window will pop up installation nepodisannyh drivers (unless you have disabled control Driver's signature) - choose "install anyway". Total required to be 4-D posts.
Charge your phone for at least 80%.
Distort the phone battery.
Clamp on the phone off cells. "Minus the volume" and not releasing it to connect your phone to a computer.
Will the process of installing the drivers of virtual COM-ports.
After installing the drivers - disable the phone.
Run ResearchDownload.
Press the key with the first pinion and specify your firmware file (PAC) file.
We look forward to unpack the firmware.
(On the disc, where the lies you ResearchDownload should be free 4 GB). After unpacking, you are required to become available in other panel keys.
Click on the second cells. with 2 gears.
In the Options window, go to the tab "JIG Control" and remove all the jackdaws "Enable JIG ..." in the section "JIG State".
"You have not enable any JIG!"Press"ОК".
This news informative and everything does not affect.
Go to the tab "Backup" and becomes the checkbox "Save NV to local".
This will allow us to save NVRAM reformatting.
The program itself will fill the saved NVRAM ago when the firmware after formatting.
Go to the "Flash Operations" tab.
At the bottom put the check on the "Erase All Flash".
Go to the tab "Options" and remove the checkbox with "Reset to normal"
Click the button below "OK".
The key panel programki third click the arrow button (Start).
At the message "Do you really want to delete all flash memory in the phone?" The answer is - yes (yes)
Distort the battery in the phone.
Clamp on the phone off cells. "Minus the volume" and not releasing it to connect your phone to your computer.
The window of the program is required to process begun by the firmware.
In the column "Progress" percent fill and format for each partition, and column Time (s) - time.
Only after such as in the column "Progress" sign appeared greenish color "PASSED!". - Click the Stop button (fourth from the square).
Disconnect the phone.
Distort the battery.
Turn on the phone.
We are waiting the first initialization firmware after pouring (very long, up to 5 minutes).
As a result, you get a clean unlocked phone. !!!
0 comments:
Post a Comment