Specifications / Overview:
Announcement: 2016, OctoberNetworks: LTE 3,7,20 tape
UMTS 900, 2100, GSM 850, 900, 1800, 1900
Internet: LTE cat.4 150/50 Mbit / s
HSDPA, HSUPA, EDGE
Wi-Fi: b / g / n, 2,4 ГГц
Screen: S-IPS, 5.2 ", 720x1280, 16M colors, touch screen, capacitive multitouch
OS: Android 6.0 Marshmallow
Iron: 1.25 GHz, Mediatek MT6737, 4 core Cortex-A53, Mali-T720
Memory: 2 GB of RAM, 16 GB ROM, Micro-SD to 32GB
Battery: Li-Ion, 2600 mAh
Weight: 143 g
Dimensions: 149.8 x 73.35 x 8.8 mm
Photos: 13 MP, flash, autofocus
Front: 5 MP
Radio: yes
Bluetooth: v4.0, A2DP
Navigation: GPS, A-GPS
SIM card 2, Micro-SIM
Flashlight: yes
* Download the firmware Fly Cirrus 7 FS511: *
MT6737M_Android_scatter.zip SIZE: 1.18KB
recovery.img SIZE: 11.7MB TWRP 3.1.0
INSTALLATION INSTRUCTIONS TWRP:
1. Unpack the archive with the program and the flash tool, Cast it on drive C. There also (on drive C) scatter file and recovery. Img. Start flash_tool file. Exe, with administrator rights (right click on the file -> Start administrator). If a warning will appear that it is not loaded with a scatter-file, then click OK brainer for this to extend
2. Before you will open the program, click on the scatter-loading button in the right corner of the program window. The browse window, navigate to the C drive and elect scatter-file mt6737_android_scatter. Txt
3. Before proceeding, make sure that the phone is disconnected from the PC. After selecting a scatter-file in the window flash tool will be required to boot recovery file, make sure that the flag should only against the recovery section and nowhere else.
4. Further, the program for transfer to the phone connection standby mode, press the download in the program window.
After such as pressed the download, connect your phone to the PC switched off. Sometimes you need to "distort" the battery (remove / insert). Flash tool startonet recovery your firmware. Since we only sews recovery section, the firmware is required to take a matter of seconds. After the end of the firmware will appear a window with a green circle (if the firmware does not start, in 99% of cases, it is a problem with the drivers, there are stupid they are not installed)
As soon as the firmware is finished, turn off the phone from the PC.
1. Unpack the archive with the program and the flash tool, Cast it on drive C. There also (on drive C) scatter file and recovery. Img. Start flash_tool file. Exe, with administrator rights (right click on the file -> Start administrator). If a warning will appear that it is not loaded with a scatter-file, then click OK brainer for this to extend
2. Before you will open the program, click on the scatter-loading button in the right corner of the program window. The browse window, navigate to the C drive and elect scatter-file mt6737_android_scatter. Txt
3. Before proceeding, make sure that the phone is disconnected from the PC. After selecting a scatter-file in the window flash tool will be required to boot recovery file, make sure that the flag should only against the recovery section and nowhere else.
4. Further, the program for transfer to the phone connection standby mode, press the download in the program window.
After such as pressed the download, connect your phone to the PC switched off. Sometimes you need to "distort" the battery (remove / insert). Flash tool startonet recovery your firmware. Since we only sews recovery section, the firmware is required to take a matter of seconds. After the end of the firmware will appear a window with a green circle (if the firmware does not start, in 99% of cases, it is a problem with the drivers, there are stupid they are not installed)
As soon as the firmware is finished, turn off the phone from the PC.
0 comments:
Post a Comment