Smartphone Xiaomi Redmi Note 3 Review / Firmware Update / Stock Rom

Plan 

Xiaomi Redmi Note 3 - the principal gadget in the spending line Redmi with a non-detachable body made of metal. It is additionally a standout amongst the most metal cell phones of the organization, in light of the fact that before it was constrained just to side edges, or covered up under the plastic casing, and after that aluminum covers a large portion of the back. 

From underneath and from above there are little plastic supplements - they are required for ordinary operation of recieving wires. The area of the useful components is customary for the organization, helpful. Over the screen there is a speaker, a camera, an arrangement of sensors and a diode of notices, underneath the show there are three touch keys with white backdrop illumination. 

On the left side there is a plate for two MicroSIM, on the right - the keys for turning on and changing the volume. From the best you can locate a 3.5 mm jack, a receiver of the clamor lessening framework and an infrared port window, from underneath - a principle mouthpiece and a MicroUSB connector. The last mentioned, in the same way as other Xiaomi, is moved to the side. 

Behind the primary camera, blaze and unique mark scanner, they are altogether confined with slick chamfers and are insignificantly recessed inside. In the lower part - a wide work of interactive media progression. 

From the perspective of the assemble quality, there are no grievances about the gadget. The connection of the case consequently ensures a specific unbending nature of the plan, and the subtle elements in our cell phone are superbly coordinated to each other. Nonetheless, in the event that you set an objective, at that point emphatically contorting the body, you can accomplish an insignificant backfire or squeaks - it's still not the iPhone. 

A few highlights of the ergonomics of the Redmi Note 3 are difficult to recognize - before us the gadget with the run of the mill measurements for its inclining, the normal weight and the thickness of the case. The corners are adjusted, so the cell phone falls well in the palm of your hand and with a specific extend it can be utilized with one hand. In winter, the skin of the hands is more dry, so in a few circumstances the body is dangerous, yet everything is individual here. 

In the event that you think about Redmi Note 2 and 3, at that point in the plan there have been numerous great changes. Due to the non-distinct case, they disposed of the squeaks and reaction of the cover, which some of the time showed up in the past age, and because of the metal back, the cell phone looks and feels more costly than it truly is. 

Display

As in its ancestor, Redmi Note 3 has an IPS screen with a corner to corner of 5.5 crawls with a determination of 1920 by 1080 pixels. The network is ​​covered with a defensive glass with an oleophobic covering. Albeit formally the qualities have not changed, the new cell phone show is better. For instance, it can be seen from the consequences of estimations with a colorimeter: 

Gadget/Characteristic Maximum shine, compact disc/m2 Minimum brilliance, album/m2 Contrast proportion 

These progressions are obvious to the stripped eye. We don't have Redmi Note 2 for coordinate correlation, yet the shading version of the screen turned out to be more soaked and complexity. Oleophobic covering stayed give or take the same - the finger slides well, and fingerprints, in spite of the fact that show up, however effectively deleted. 

On the off chance that you assess the screen intricately, at that point we have a decent show, with astounding review edges, quiet common shading proliferation and magnificent adjustment. 

You can modify the complexity and shading temperature - this is valuable in the event that you need to alter the screen "for yourself." There is additionally a perusing mode, flooding the screen with yellow, which lessens eye weariness (in principle). 

The show has no basic disadvantages - everything is great with brilliance and differentiate, and with shading rendering as well. Be that as it may, there are nitpicking - it doesn't turn on by twofold tapping and is denied of the affectability mode for controlling gloves, and in a few circumstances the auto shine sensor exaggerates the backdrop illumination level. 

Equipment stage, unique finger impression peruser 

Xiaomi Redmi Note 2 was based on the stage MediaTek Helio X10 - a fruitful eight-center chip (center Cortex-A53 2 GHz recurrence) with an effective designs PowerVR G6200, so the new cell phone did not transform anything profoundly. Huge changes incorporate the disappointment of the microSD memory card opening and the way that the more seasoned adaptation with 32 GB of RAM is presently furnished with 3, not 2 GB of RAM. As befits a cutting edge gadget, Redmi Note 3 has Wi-Fi standard 802.11 a/b/g/n/air conditioning (2.4 + 5 GHz), Bluetooth 4.1 and GPS/GLONASS. There is likewise a FM radio and an infrared port for controlling family apparatuses. 

Without precedent for the items Xiaomi showed up unique mark scanner. As in the gadgets of the Nexus line or Huawei cell phones, it is situated behind, under the camera. The organization guarantees that unique finger impression acknowledgment happens in 0.3 seconds. This is fundamentally the same as reality.

Hardware platform, fingerprint reader

Xiaomi Redmi Note 2 was built on the platform MediaTek Helio X10 - a successful eight-core chip (core Cortex-A53 2 GHz frequency) with a powerful graphics PowerVR G6200, so the new smartphone did not change anything radically. Significant changes include the failure of the microSD memory card slot and the fact that the older version with 32 GB of RAM is now equipped with 3, not 2 GB of RAM. As befits a modern device, Redmi Note 3 has Wi-Fi standard 802.11 a / b / g / n / ac (2.4 + 5 GHz), Bluetooth 4.1 and GPS / GLONASS. There is also an FM radio and an infrared port for controlling household appliances.

For the first time in the products Xiaomi appeared fingerprint scanner. As in the devices of the Nexus line or Huawei smartphones, it is located behind, under the camera. The company claims that fingerprint recognition occurs in 0.3 seconds. All this is very similar to the truth.

The smartphone can store fingerprints of five fingers, and the accuracy and speed of recognition is comparable to the iPhone 6s - just touch the scanner, after that the smartphone is unlocked, the screen turns on and you get to the desktop.

The speed of the interface, smooth animation or performance in games, there are no complaints, this relatively budget smartphone can compete even with the flagships. But you should consider some gluttony of the MIUI shell, the system takes about 1 GB of RAM, so if you need a stock, it's better to give priority to the older version with 3 GB of RAM and 32 GB of ROM (we tested this one).

Working hours

In the non-separable housing is installed a battery for 4000 mAh (1000 mAh more than in Redmi Note 2). From smartphones with capacious batteries you always expect some sort of records, but the real time of work has increased in proportion to the capacity (the rest of the accessories have not changed conditionally).


At an average load, Redmi Note 3 can work two full days showing 4 hours of the active screen. In most cases, when I used a smartphone in my usual mode, it worked for a day and a half, showing 5.5 hours of screen. Usually my usage profile includes synchronization of two Google accounts, use of mobile Internet, correspondence in Viber and Facebook, reading Twitter, minimum of telephone conversations, some music, video from YouTube, synchronization of the pedometer by Bluetooth - the load is not a record, but quite sufficient.

Calls, interactive media 

Xiaomi Redmi Note 3 bolsters synchronous operation of two MicroSIMs in view of a solitary radio module. The settings of their operation are standard - you can set "Simka" for calls and the Internet, in the Phone and Messaging applications two SIM-card symbols are shown. Both can work in 3G and 4G systems - these parameters are indicated in the settings. For each card, you can set your own approaching call song and messages. 

As to nature of the flag gathering of portable systems or the volume of the speakers, the affectability of the receiver to the cell phone, there are no remarks - everything is working legitimately. Independently, you can note the two elements - the discussion has a decent volume hold, and the call is uproarious and subjective, much of the time it doesn't cover or is totally muffled. 

Vibrating caution of medium quality, once in a while you can not feel it. He doesn't have the most lovely, somewhat rattling vibration, for instance, I killed the vibration by squeezing the touch keys, in spite of the fact that much of the time I don't. The nature of music playback at the typical normal level - great volume, all is well with detail, there are no superfluous clamors. 

Cameras 

The cell phone has two cameras - the principle one with a determination of 13 megapixels (f/2.2), a two-tone LED streak and a stage self-adjust and a front one at 5 megapixels (f/2.0), both can shoot Full HD video. In examination with the last age of changes, in any event - they included a twofold blaze and educated the "front" to shoot video in Full HD, based on the photos, the modules continued as before. 

This implies photographs taken in the daytime in the city or in sufficiently bright rooms will be of high caliber, with adequate detail, characteristic shading version and the right white adjust. 

We additionally take note of the quick operation of the stage self-adjust and the generally astounding usage of the HDR mode. 

Night or night photographs look officially less amazing - detail diminishes, any longer there is a core interest. In the troublesome states of shooting reasonable cell phones have nothing to contradict the leads. 

Programming shell and use highlights 

The cell phone keeps running under MIUI 7.1, in light of Android 5.0.2. While overhauling from MIUI 7 to MIUI 7.1, the shell usefulness did not change, in any event, I couldn't locate any obvious changes - we have a similar firmware with an interface where all introduced applications are put on desktops and arranged into organizers. There is bolster for subjects that change application symbols, outline of implicit projects, settings menu. In the framework, you can adaptably arrange an assortment of settings, incorporating running applications out of sight, working with notices, getting to projects to individual information and portable Internet - this is helpful to the individuals who get a kick out of the chance to design everything for themselves 

Lamentably, in the most recent year in the arrangement of Xiaomi there are changes that lessen the ease of use of its gadgets. At the season of composing the survey, just authority Chinese firmware (without confinement and Google administrations) and firmware interpreted by fan groups are accessible for the gadget. Normally, we are keen on the last mentioned, yet to introduce them you have to utilize the PC and the Flash Tools programming or to chip away at opening the bootloader and introducing outsider recuperation - this isn't exceptionally helpful. 

A cell phone purchased in China can accompany any firmware (counting infections), in the event that you purchase in Ukraine, at that point the store can offer and instantly adjusted the gadget. Regardless, a large portion of the help will fall on the shoulders of the client and on the off chance that you are not acquainted with the words recuperation, firmware, you don't recognize what the gathering is 4pda, at that point from the buy, it is most likely better to hold back.

Specifications:
Body materials: metal, glass, plastic inserts
Operating system: Android 5.1, MIUI V7
Network: GSM / EDGE, UMTS / HSDPA, LTE (FDD-LTE Band 1/3/7), support for two SIM cards (microSIM)
Screen: IPS LCD, diagonal 5.5 ", resolution 1920x1080 pixels, ~ 403 ppi
Platform: Mediatek Helio X10 (MT6795) / Qualcomm Snapdragon 650 (Xiaomi Redmi Note 3 Pro)
Processor: eight-core, 2 GHz (Cortex-A53)
Graphics: PowerVR G6200 (550/700 MHz) / Adreno 510 (Xiaomi Redmi Note 3 Pro)
Memory: 2/3 GB
Flash memory for data storage: 16/32 GB
Memory card slot: no
Interfaces: Wi-Fi (ac / a / b / g / n) dual-band, Bluetooth 4.1 LE, microUSB connector for charging / synchronization, 3.5 mm for headset, infrared
Main camera: 13 MP with autofocus and flash, 5 lenses, f / 2.2, video recording in FullHD / 16 Mp, f / 2.0 (Xiaomi Redmi Note 3 Pro)
Frontal camera 5 MP, f / 2.0
Navigation: GPS (support A-GPS), Glonass, Beidou
In addition: accelerometer, light sensor, proximity sensor, quick charge function Mediatek Pump Express (50 percent for 1 hour)
Battery: 4000 mAh
Dimensions: 150 x 76 x 8.7 mm
Weight: 164 grams

The WWW.SYSPACK.ORG Website and All Information are Protected by Copyright. Transferring or Copying any Information from WWW.SYSPACK.ORG to any Site is Strictly Forbidden.

Stable Firmware[ROM]
Version: V8.5.2.0.LHNCNED (MIUI8) Size: 1.1G

Dev Firmware[ROM]
Version: 7.10.19 (MIUI9) Size: 930M

About the official stable firmware:
Updated every 1-2 months
Minor updates come just 1-2 weeks and contain bug fixes major releases
It contains all the innovations and features weekly developer firmware month ago

To install Via Recovery of Full ROM drive version:
V8.5.2.0

Old Firmware:
To install Via SPFlashTool of Full ROM drive version
V8.5.2.0