Samsung Galaxy S5 QHD LTE-A (Korea) SM-G906S will be reviewing the Samsung Galaxy S5 QHD LTE-A (Korea) The SM-G906S is Samsung which releases in 2014 with LTE, GSM and 3G networks which Samsung is capable of katakana good because if viewed from the network has been a trend in the present with the 4G network, super AMOLED screen 5.1-inch screen size and its android persi is KitKat 4.4.2 which can be updated to Lollipop 5.0.1. has 2 front and rear camera with 16 MP front camera and 2 MP second camera, 3 GB of internal memory 16 GB RAM you most likely notice is Li-Ion battery 2800 mAh battery, android OS update way can use the way below.
NOTE !!! : I am not responsible if there is damage at the time of flashing then of that please be careful for his attention thanks.
Samsung Galaxy S5 QHD LTE-A (Korea) SM-G906S | ||
Driver | Samsung | |
Odin | Odin3 v3.09.rar | |
Mobile | S5 QHD LTE-A (Korea) | - |
Model | SM-G906S | - |
System Version | KitKat 4.4.2 | - |
Baseband | SKC G906SKSU1ANK1 | - |
Firmware | ||
Mobile | S5 QHD LTE-A (Korea) | - |
Model | SM-G906S | - |
System Version | Lollipop 5.0.1 | - |
Baseband | SKC G906SKSU1BOE1 | - |
Firmware | ||
Mobile | S5 QHD LTE-A (Korea) | - |
Model | SM-G906S | - |
System Version | Marshmallow 6.0.1 | - |
Baseband | SKC G906SKSU1CPF2 | - |
Firmware | Download | |
Steps of Flash Samsung Galaxy S5 QHD LTE-A (Korea) SM-G906S
- Things that should not be forgotten is Extrack all the files that have been downloaded because it is still in the form of winrar to live extrack all is wrong because klau already in extrack easy to run the application.
- Open Odin and install Samsung Driver on your PC until finished if it can restart your computer.
- Live step Next turn off the Samsung Galaxy S5 QHD LTE-A (Korea) SM-G906S and turn it back on by pressing the volume down key + home + power simultaneously and wait for it to vibrate into download mode and press the volume up button then it goes into download mode.
- Connect your Samsung Galaxy S5 QHD LTE-A (Korea) SM-G906S to your Pc using the USB cable so it automatically detected ID: COM on Odin turns on the phone and your PC is connected with Odin.
- Lost click PDA / AP on Odin and navigate the file of your firmware extarck result that is formatted xxx.tar.md5 where you put it there you can enter on odin wait until the loading process is complete.
- Live directly click START and wait until the process is complete until there is a reading PASS.
0 comments:
Post a Comment