Specifications / Overview:
Qualcomm Snapdragon 410 MSM8916
Processor: ARM Cortex-A53, 1200MHz, the number of cores: 4
Graphic processor: Qualcomm Adreno 306 400 MHz
RAM: 2 GB of 533 MHz
Internal memory 16 GB
Memory Card: MicroSD, MicroSDHC, microSDXC
Screen: 5, Super AMOLED, 720 x 1280 pixels, 24-bit
The battery is 2600 mAh, Li-Ion (Li-Ion)
Operating System: Android 5.1.1 Lollipop
Camera: 3264 x 2448 pixels, 1920 x 1080 pixels, 30 frames / sec
SIM-card: Micro-SIM
Wi-Fi: б, г, п, Wi-Fi Hotspot, Wi-Fi Direct
USB 2.0, Micro USB
Bluetooth: 4.1
Navigation: GPS, A-GPS, GLONASS, BeiDou
Dimensions: 71.3 x 142.2 x 8 mm
Weight: 139 g
* Download Firmware Samsung Galaxy J3 Pro SM-J3110: *
J3110ZCU1APK1_J3110CHCAPK1_J3110ZCU1APK1 SIZE: 946MB Official From GDrive
* Download Firmware Samsung Galaxy J3 Pro SM-J3119: *
Download the firmware for all versions of the Galaxy J3 Pro from Z3X Team Server:
J3110ZCU1APE8_J3110CHCAPE8.zip
2. Samsung files/Firmware/SM-J3110 0.92 Gb
J3110ZCU1APE9_J3110CHCAPE9.zip
2. Samsung files/Firmware/SM-J3110 0.92 Gb
J3119KEU1APG1_J3119CTC1APG1.zip
2. Samsung files/Firmware/SM-J3119 1.12 Gb
Install TWRP-Recovery and SUPERSU:
A few people did not work to install firmware method Route cf-auto-root. There are ways to install root through twrp-recovery.
Before twrp firmware change options found in the phone:
1. Turn on the Remote Control samsung: Settings -> Lock Screen & Protection -> Find your phone -> Remote Control -> Off
2. Settings -> Developer Options -> OEM Unlocking -> check mark should be
To connect the Developer menu, you need to go to Settings -> About -> And reap the build number, you need to understand when to end :)
-Download TWRP_Recovery.
-File (Recovery.Tar.Md5) sew as a normal firmware, putting in odin in ap window.
Laws gov- erning not found, but it is sometimes necessary in the program of odin, tab "options" checkbox to reset the auto reboot.
-The need this to the device after a firmware twrp-Recovery neushel immediately to reboot.
-If after flashing TWRP-recovery device restarts immediately, with some strange chance at not rooted devayse you boot stock rekaveri.
Inadmissible you flashed Twrp Stripped daw on avtorebute. As in this case, boot into Recovery?
-Turn OFF cable
-Volume keys "-" and Power as soon as the screen goes blank press keys to enter the recovery "home", Volume "+" and Power ... if not work or hesitated, and went to reboot the device, then click again Volume "-" and the Power, and the screen goes blank as the only ... [/ quote]
-If the device has rutovan (but you need to install TWRP elementary), then remove the checkbox with autoreboot one does not need this only not rooted devices.
-Root device after flashing TWRP through odin reboots itself, turn it off ... we enter into standard recovery-okay, TWRP in place.
-I even not rooted device twrp-recovery permanently sewed with checkbox on autoreboot permanently successful.
-Be to believe that twrp-recovery we have established ...
-sets Supersu for this to get root-access to the file system device.
-go to the topic su and swing of the cap threads extreme version of su to install through the custom recovery.
-We need to recovery of a custom one that with the expansion of .Zip
Downloading -SuperSu.Zip.
![](https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjiU0ABoxbyi1-po-BEpElY2YEZDVI1_XT6qwhE3cRKpd56nrpCN1NN31Fz6U9s-QyzN0rFiZkwewEwM9k5l0oCeLabDzifaDMTTEG0Qs6SLEA5WcTx0B3zFU8cvlws8W6as6UnPaFwGV4/s320/Samsung-Galaxy-J3-Pro.jpg)
Processor: ARM Cortex-A53, 1200MHz, the number of cores: 4
Graphic processor: Qualcomm Adreno 306 400 MHz
RAM: 2 GB of 533 MHz
Internal memory 16 GB
Memory Card: MicroSD, MicroSDHC, microSDXC
Screen: 5, Super AMOLED, 720 x 1280 pixels, 24-bit
The battery is 2600 mAh, Li-Ion (Li-Ion)
Operating System: Android 5.1.1 Lollipop
Camera: 3264 x 2448 pixels, 1920 x 1080 pixels, 30 frames / sec
SIM-card: Micro-SIM
Wi-Fi: б, г, п, Wi-Fi Hotspot, Wi-Fi Direct
USB 2.0, Micro USB
Bluetooth: 4.1
Navigation: GPS, A-GPS, GLONASS, BeiDou
Dimensions: 71.3 x 142.2 x 8 mm
Weight: 139 g
* Download Firmware Samsung Galaxy J3 Pro SM-J3110: *
J3110ZCU1APK1_J3110CHCAPK1_J3110ZCU1APK1 SIZE: 946MB Official From GDrive
* Download Firmware Samsung Galaxy J3 Pro SM-J3119: *
SM-J3119_TV-CHPLAY-5.1.1-FULL SIZE: 927MB Official From GDrive
J3119_TV_CHPLAY_5.1.1_Only Firmware Full SIZE: 751MB Official FROM CloudMailDrive
j3119-j3110-TWRP-recovery.tar SIZE: 14.4MB Для обеих моделей
ROOT_J3119KEU1APG1.tar SIZE: 11.5MB Flash With ODIN 3.09 Samsung Flasher
Phone INFO.apk SIZE: 2.47MB
CROM_Service.apk SIZE: 1.34MB
Ways to Bypass GOOGLE ACCAUNT Factory Reset Protection (FRP LOCK) on Samsung devices 2016-2017.................Click HERE
Download the firmware for all versions of the Galaxy J3 Pro from Z3X Team Server:
J3110ZCU1APE8_J3110CHCAPE8.zip
2. Samsung files/Firmware/SM-J3110 0.92 Gb
J3110ZCU1APE9_J3110CHCAPE9.zip
2. Samsung files/Firmware/SM-J3110 0.92 Gb
J3119KEU1APG1_J3119CTC1APG1.zip
2. Samsung files/Firmware/SM-J3119 1.12 Gb
Install TWRP-Recovery and SUPERSU:
A few people did not work to install firmware method Route cf-auto-root. There are ways to install root through twrp-recovery.
Before twrp firmware change options found in the phone:
1. Turn on the Remote Control samsung: Settings -> Lock Screen & Protection -> Find your phone -> Remote Control -> Off
2. Settings -> Developer Options -> OEM Unlocking -> check mark should be
To connect the Developer menu, you need to go to Settings -> About -> And reap the build number, you need to understand when to end :)
-Download TWRP_Recovery.
-File (Recovery.Tar.Md5) sew as a normal firmware, putting in odin in ap window.
Laws gov- erning not found, but it is sometimes necessary in the program of odin, tab "options" checkbox to reset the auto reboot.
-The need this to the device after a firmware twrp-Recovery neushel immediately to reboot.
-If after flashing TWRP-recovery device restarts immediately, with some strange chance at not rooted devayse you boot stock rekaveri.
Inadmissible you flashed Twrp Stripped daw on avtorebute. As in this case, boot into Recovery?
-Turn OFF cable
-Volume keys "-" and Power as soon as the screen goes blank press keys to enter the recovery "home", Volume "+" and Power ... if not work or hesitated, and went to reboot the device, then click again Volume "-" and the Power, and the screen goes blank as the only ... [/ quote]
-If the device has rutovan (but you need to install TWRP elementary), then remove the checkbox with autoreboot one does not need this only not rooted devices.
-Root device after flashing TWRP through odin reboots itself, turn it off ... we enter into standard recovery-okay, TWRP in place.
-I even not rooted device twrp-recovery permanently sewed with checkbox on autoreboot permanently successful.
-Be to believe that twrp-recovery we have established ...
-sets Supersu for this to get root-access to the file system device.
-go to the topic su and swing of the cap threads extreme version of su to install through the custom recovery.
-We need to recovery of a custom one that with the expansion of .Zip
Downloading -SuperSu.Zip.
Video instructions for unlock SIM 1 J3119:
0 comments:
Post a Comment